Built some drawers to fit inside an old garage sale find cabinet - will post it with the cards loaded up in a few days in the collection thread...
Also lined the bottom of each drawer with 2mm foam rubber sheets for good measure…
- IMG_2151.JPG (83.75 KiB) Viewed 3327 times
10 drawers - 5 for 2 deck stacks, 1 for three, 4 for four - each holds 24 stacks in 3 rows and 8 columns
Drawers have full extension slides.
- IMG_2154.JPG (85.03 KiB) Viewed 3327 times
Test fit stored on side (most will actually be stored flat)
- IMG_2078.JPG (125.86 KiB) Viewed 3327 times
Drawer parts
- IMG_2090.JPG (115.95 KiB) Viewed 3327 times
Assembled
- IMG_2094.JPG (116.44 KiB) Viewed 3327 times
Mold for smaller dividers, for 2 deck height drawers (also made one for 3 and 4 deck height drawers)
- IMG_2286.jpg (45.3 KiB) Viewed 3327 times
Cast dividers, sanded and clear coated, ready for use in the morning
- IMG_2285.jpg (94.24 KiB) Viewed 3327 times
